2000/3/7 PMVision 1.10 Release Note PMVision(TM) is a configuration and monitoring application for Lucent PortMaster(R) products and the MERLIN MAGIX(TM) Integrated Network Access (INA) module. PMVision is based on the Sun Microsystems Java Virtual Machine version 1.1.6. Version 1.10 of PMVision is available to any Lucent customer at no charge. PMVision works best with the following ComOS(R) versions and provides equivalent functions: * ComOS 4.2 (in beta) * ComOS 4.1 * ComOS 4.0 * ComOS 3.9 (in beta) * ComOS 3.8.2 * ComOS 3.8 * ComOS 3.7.2c3 If you are running an older version of ComOS, not all PMVision functions are available. _______________ Contents About PMVision New Features -- None Bug Fixed Main Functions Limitations Ether0 Requirements for a Redundant PortMaster 4 System Upgrading a PortMaster 4 to ComOS 4.2 System Requirements Installation Deinstallation Running PMVision Login Options Debug Log Technical Support ______________ About PMVision PMVision was designed to do the following: * Be portable across operating systems. * Manage multiple devices simultaneously. * Extend to allow Wizards and Smart Agents to manage devices. * Manage other platforms using ComOS. PMVision provides a single document interface (SDI) panel. A control tree appears on the left, a list of currently open products -- including selection information -- appears at the top center, and the main function window is in the center. PMVision includes online help. _______ Device Access To access a device, you select the Connect option from the Device pull-down menu, or select either PortMaster or INA in the control tree. PMVision allows you to connect to a device using the default !root login, or to use RADIUS authenticated administrative logins if the device is appropriately configured. If RADIUS authenticated administrative logins are used, the password for these logins is currently sent over the connection in clear text. _______ RADIUS User Permissions A RADIUS NAS-Prompt-User has limited command rights. A RADIUS Administrative-User is equivalent to the !root administrative login. PMVision treats the RADIUS NAS-Prompt-User administrative user the same as the RADIUS Administrative-User until ComOS denies access to a function. For example, a user at the NAS-Prompt-User level can use PMVision to create a user or location record, but creation of that record is denied when the command is sent to the PortMaster. _______________ New Features -- None This release is a bug fix release only and does not add any new features. _______________ Bug Fixed PMVision 1.10 fixes a bug in PMVision 1.9 that prevented the application from restoring a backup file to a PortMaster 4 with only one system manager module. Backup files are now restored properly. ______________ Main Functions You access PMVision functions by clicking them in the control tree. PMVision provides the following main functions: * Monitoring (requires ComOS 3.8 or later) * Graphing (requires ComOS 3.9 or later, and is not available for INA) * Diagnosis -- Debug (not available for INA) * Maintenance -- Upgrade, Back Up, and Restore * Command -- Using the ComOS command line interface * Configuration _______ Monitor PMVision provides extensive real-time monitoring capabilities, including the ability to monitor diagnostic commands. The Monitor tree item allows you to monitor operations on the devices as follows: * Chassis shows power use, fan status, and temperature for each board on a PortMaster 4. This feature works only with ComOS 4.0 or later. * Users shows the list of connected users. * Modem Summary shows the number of modems in each state on a PortMaster 3 running ComOS 3.9 or later or on a PortMaster 4. * Modem Details shows the state of modems either for an entire PortMaster 3 chassis or for a single PortMaster 4 Quad T1 or Tri E1 board. * Session Summary shows the number of connections for various connection speeds on a PortMaster 3 running ComOS 3.9 or later or on a PortMaster 4. * Session Details shows active sessions either for an entire PortMaster 3 chassis or for a single PortMaster 4 Quad T1 or Tri E1 board. * Lines shows the state of lines for an entire chassis. * Interfaces shows active interfaces either for an entire PortMaster 3 chassis or for a single PortMaster 4 Quad T1 or Tri E1 board. * Alarms shows the list of SNMP alarms for ComOS 3.9 or later. * NAT Sessions shows the list of network address translator (NAT) sessions on a PortMaster running ComOS 3.9 or on an INA module running ComOS 4.1.5. * NAT Statistics shows the list of NAT statistics on a PortMaster running ComOS 3.9 or on an INA module running ComOS 4.1.5. * OSPF Neighbors shows the list of OSPF neighbors on a PortMaster running ComOS 3.9 or later. * Network Connections shows the list of network connections on a PortMaster running ComOS 3.9 or later. * Mux Channels shows the state of channels on a T3 Mux or STS-1 Mux board. * Mux Stats shows the state of the multiplexor (mux) line on a T3 Mux or STS-1 Mux board. * Ethernet shows the activity on all Ethernet interfaces. * L2TP Tunnels shows the Layer 2 Tunneling Protocol (L2TP) tunnels on your PortMaster. * L2TP Sessions shows the L2TP sessions on your PortMaster. _______ Graph The Graph tree item allows you to view and log the history of modem and session summaries. You can specify the log interval, log file, and colors for each item in the display. The colors are saved to a preferences file. This feature is currently available only on ComOS 3.9 or later, and is not available on the INA module. * Modems shows the Modem Summary information over time. * Sessions shows the Session Summary information over time. _______ Diagnose Debug allows you to display debug information. This feature is not available on the INA module. _______ Maintain * Upgrade allows you to upgrade your PortMaster with a ComOS upgrade file. * Back Up allows you to save certain parts of your configuration to a file. This configuration is saved in ASCII file format. * Restore allows you to restore a previously saved configuration file. When restoring a configuration, PMVision is not just performing an erase-and-restore operation. Instead, the configuration file overwrites the specific configuration information that is being restored from the file. Any items that are not overwritten by the restore operation are left unchanged. PMVision does not read or restore binary backup files. However, you can use Upgrade to send binary backup files created by the pmreadconf utility to a PortMaster. CAUTION: Because the binary backup file format is heavily dependent on ComOS version, restoring a file saved from one version onto another is not recommended. WARNING - LOSS OF USER PASSWORDS. If you are running ComOS 3.8 or earlier, backing up the user table fails to recover the individual user passwords. For this reason, restoring a user table from a PMVision backup produces null passwords in the user table. If a user entry has a null password, the PortMaster does not prompt the user for a password at login. As a result, the user might be unable to log in. In addition, an unauthorized user might gain access to the user account because no password is required. After a backup-and-restore operation, you must add user passwords through either PMVision or the command line interface. As of PMVision 1.3 and ComOS 3.8.2 and later releases, user passwords can be retrieved from the PortMaster. However, the passwords are passed from the PortMaster to PMVision in clear text. They are then encrypted when saved to the file. WARNING - LOSS OF !ROOT PASSWORDS AND SECRETS. If you are running ComOS 3.8 or earlier, the administrative (!root) password and RADIUS and ChoiceNet(R) secrets are not saved by the backup operation. Unless you add the administrative password and RADIUS and ChoiceNet secrets to the backup file, they are not restored and the previous password and secrets remain in effect. As of PMVision 1.3 and ComOS 3.8.2 and later releases, RADIUS and ChoiceNet secrets can be retrieved from the device. However, the secrets are passed from the device to PMVision in clear text. They are then encrypted when saved to the file. _______ Command Command provides a command window for entering ComOS commands and viewing command output. The following ComOS commands are not allowed in Command: * attach * dial * ping * pmlogin * ptrace * rlogin * set debug * telnet * tftp * traceroute _______ Configure Configure allows you to enter, view, and update configuration information for the device. PMVision 1.10 supports the following PortMaster 4 modules and boards: * System manager module * Redundant system manager modules * Quad T1 board * Tri E1 board * Standalone single Ethernet board * Standalone dual Ethernet board * T3 Mux board * Synchronous Transport Signal 1 (STS-1) Mux board * L2TP network server (LNS) board When controlling a PortMaster running a ComOS release earlier than ComOS 3.8, PMVision does not provide configuration for the Simple Network Management Protocol (SNMP) or the host table. PMVision does not provide configuration for static routes. _______________ Limitations PMVision 1.10 has the following known limitations: * ComOS 4.2 does not always send all the active SNMP alarms to PMVision. To display the alarms that are active on a PortMaster 4, enter "show alarms" in the Command window. * The Session Summary display does not work with an Office Router, PortMaster 2, or IRX(TM) Router running ComOS 3.9b27. * You cannot use PMVision to configure or back up static routes. * If you are running a release earlier than ComOS 3.8, you cannot use PMVision to configure SNMP or the host table. * Saving port configuration settings while the PortMaster is in use might improperly rearrange ports out of their correct order. This behavior is caused by a ComOS bug that incorrectly reports the port type of established ports. To avoid reordering ports incorrectly, be sure to save port configuration settings when the PortMaster is not being used. * Using the "show mux" command in the Command panel produces truncated output. * The control tree is not updated when table entries are deleted or renamed. * LEDs for the T3 Mux and STS-1 Mux boards on the PortMaster 4 are not displayed in the main monitor panel. * LEDs for the Ethernet ports are not displayed in the main monitor panel. * The main monitor panel does not refresh the display of boards in the PortMaster 4 chassis. * Using the "Log to File" option on the Maintain->Restore panel causes user passwords to be written to the log file in clear text. * The Monitor->Interfaces display does not show the point-to-point interfaces on the PortMaster 4. * The backup operation (Maintain->Back Up) does not save the administrative password. * You cannot connect to more than five PortMaster products unless you have more than 32MB of RAM in the computer running PMVision. * The Monitor->Modem Details display shows different call and retrain counts than does a "show modems" command entered at the command line. * Modem information is not always displayed in the correct order. Click the column name to sort the column correctly. * On the Diagnose->Debug panel, the debug options do not always turn off correctly after you deselect them, and might continue to display debug information. To stop the display of all debug information, turn off all debug options by clicking Clear All and then Apply in the Debug Options dialog box. * Because ComOS has only one set of debug flags, changing the debug settings on the command line affects the debug messages displayed in the PMVision debug panel. * In Microsoft Windows, the "hourglass" cursor remains visible after PMVision completes an operation. Move the mouse to correct the cursor. * When PMVision is run under Motif or OpenWindows, the following text might appear but does not indicate any runtime problems in PMVision: Warning: Name: scrollbar Class: XmScrollBar The scrollbar page increment is less than 1. * If a PortMaster is sent unsupported commands, a Command Error dialog box is displayed. Click Done to dismiss the box and return PMVision to a normal state. _______________ Ether0 Requirements for a Redundant PortMaster 4 System For the redundant system manager module feature to work correctly, the Ether0 interface must be configured and active on each manager module. If you use the Open Shortest Path First (OSPF) routing protocol, you must now set the OSPF router ID on the Ether0 interface for each manager module. _______________ Upgrading a PortMaster 4 to ComOS 4.2 This special upgrade process applies only to PortMaster 4 systems running a ComOS version earlier than ComOS 4.2. Once the PortMaster 4 is running ComOS 4.2, PMVision will correctly handle configuration, backup, restore, and upgrade operations on a system operating with redundant system manager modules. Because PMVision 1.10 needs ComOS 4.2 to correctly identify a redundant PortMaster 4 system, you must use the following special process to upgrade a PortMaster 4 to ComOS 4.2. To upgrade to ComOS 4.2 from any earlier ComOS release, follow these steps EXACTLY: 1. Obtain ComOS 4.2. 2. Use PMVision to connect to the Ether0 interface of each installed manager module. 3. Select both addresses in the device list. 4. Select the Maintain->Upgrade option. DO NOT select the "Reboot After Upgrade''option. 5. Select the new ComOS file and click Upgrade to upgrade both manager modules. 6. Exit PMVision. 7. From the command line interface, reboot the PortMaster 4. _______________ System Requirements PMVision is a Java-based product that runs on any system with Java Development Kit (JDK) or Java Runtime Environment (JRE) version 1.1.6 or later installed. Nondevelopers can use the JRE rather than the JDK. Currently, JDK 1.1 and JRE 1.1 are available for the following and other platforms at http://www.javasoft.com/products/jdk/1.1/: * Windows NT 4.0 * Windows 95 * Solaris 2.5.1 * Solaris x86 2.5.1 * Linux 2.x * FreeBSD * SGI IRIX 6.3 * HP-UX 10.02 * Alpha Digital UNIX 4.0 * IBM AIX 4.1 * Macintosh _______________ Installation To install PMVision, follow these steps: 1. Download files from ftp.livingston.com as follows: ftp ftp.livingston.com (Enter "anonymous".) (Enter your email address; it will not echo.) binary cd pub/le/software/java - For Solaris, enter get pmvision110_solaris.tar - For other UNIX systems, enter get pmvision110_unix.tar - For Windows, enter get pmvision110.zip - For Macintosh, enter get pmvision110.sit quit 2. For UNIX systems only, define the path for jre/bin in your .cshrc file. For example, if you install the JRE in the /usr/local/lib directory, your .cshrc file must have the following entry: set path=( /usr/local/lib/jre/bin $path ) If the JDK has been installed, then change the pmvision script to use the java command instead of jre. 3. Run the installation. - For Solaris, enter the following commands on the command line: tar xvf pmvision110_solaris.tar ./pmvision_install.bin - For other UNIX systems, enter the following commands on the command line, replacing /usr/local/lucent with whatever path you prefer: mkdir /usr/local/lucent mkdir /usr/local/lucent/pmvision cp pmvision110_unix.tar /usr/local/lucent/pmvision cd /usr/local/lucent/pmvision tar xvf pmvision110_unix.tar rm pmvision110_unix.tar - For Windows, unzip the pmvision110.zip file, run the pmvision_install.exe program, and follow its instructions. - For Macintosh, unstuff the pmvision110.sit file using Stuffit Expander 5.0 or later, run the pmvision_install program, and follow its instructions. 4. If you are using a ChoiceNet server, increase to at least 2 and preferably 10 the maximum number of pmconsole connections allowed into the device. PMVision and ChoiceNet both use TCP port 1643 for communication. If only one port is available, ChoiceNet cannot send filters to the device while PMVision is connected. To increase the number of connections allowed through this port, log in to your device through the console or a Telnet session and type the following commands: set maximum pmconsole 10 save all _______________ Deinstallation * On a Solaris, Windows, or Macintosh system, an application called Uninstall_PMVision is placed in the Lucent/PMVision directory. Run this application to remove PMVision from your system. On Solaris, if the local jre directory still exists after you run Uninstall_PMVision, remove the directory with the command "rm -rf jre". * On a UNIX system, remove the shell script and jar files to remove PMVision from your system. _______________ Running PMVision * On a Windows NT system, select the PMVision icon from the Lucent folder in your Start->Programs menu. * On UNIX systems (including Solaris), run PMVision by typing "pmvision" when you are in the pmvision installation directory. If you have added the pmvision installation directory to your PATH, you can run it from anywhere. * On Macintosh systems, select the PMVision icon from the Apple menu. _______________ Login Options When running PMVision, you can use the following options: -h -u -p Use the -h, -u, and -p options together to force PMVision to log in to the specified device at startup. For example: pmvision -h Hostname -u "\!root" -p Password If only -h is specified, the Connect dialog box is displayed with the hostname filled in. _______________ Debug Log To specify the debug level for PMVision, select Help->About PMVision and choose from the drop-down list. Alternatively, you can select a debug level at the command line with the following debug options: -g -l Valid debug levels are the following: 0 - NONE - No debug output 10 - FATAL_ERRORS - Debug output for fatal errors only 20 - ALL_ERRORS - Debug output for all errors (the default) 30 - DEBUG - Useful debug information 40 - VERBOSE - More debug output than you can possibly stand The -l option sends all debug output to the directory PMVision is installed in. By default, all debug output is sent to the Lucent/PMVision directory created in your home directory. On UNIX machines, the default works properly. However the concept of a home directory is not so clear on PCs and seems to differ for each vendor's Virtual Machine. Look for one of the following: c:\java\Lucent\PMVision c:\users\\Lucent\PMVision c:\windows\Lucent\PMVision If you still cannot find the directory that contains debug output, select Find->File and search for debuglog.txt. ____________________________________________________________ Copyright and Trademarks Copyright 2000 Lucent Technologies. All rights reserved. PortMaster, ComOS, ChoiceNet, MERLIN, and NetCare are registered trademarks of Lucent Technologies. PMVision, IRX, PortAuthority, and MERLIN MAGIX are trademarks of Lucent Technologies. PolicyFlow is a service mark of Lucent Technologies. All other marks are the property of their respective owners. Notices Lucent Technologies makes no representations or warranties with respect to the contents or use of this publication, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Lucent Technologies reserves the right to revise this publication and to make changes to its content, any time, without obligation to notify any person or entity of such revisions or changes. Contacting Lucent NetCare Technical Support Lucent NetCare(R) Professional Services provides technical support via voice and electronic mail, or through the World Wide Web at http://www.livingston.com/. Mention that you are running PMVision 1.10, and include the version of JDK or JRE that you are running, the operating system version ("uname -a" output), and the version of ComOS on the PortMaster. The "About PMVision..." menu item in the Help menu displays the version of PMVision you are running, including the build date, debug level, and location of runtime debug files. Internet service providers (ISPs) and other end users in Europe, the Middle East, Africa, India, and Pakistan must contact their authorized Lucent sales channel partner for technical support; see http://www.livingston.com/International/EMEA/distributors.html. For North America, the Caribbean and Latin America (CALA), and Asia Pacific customers, technical support is available Monday through Friday from 7 a.m. to 5 p.m. U.S. Pacific Time (GMT -8). Dial 1-800-458-9966 within the United States (including Alaska and Hawaii), Canada, and CALA, or 1-925-737-2100 from elsewhere, for voice support. Otherwise, send email to support@livingston.com (asia-support@livingston.com for Asia Pacific customers).